NEL-9200

Technical data:

Viscosity-temperature curve:

Instructions:

1.The recommended mold temperature is around 110℃.Adjust the temperatureaccording to the the thickness of adhesive coated, environment temperature, humidity of material and permeability of material etc.Keep the material which coated with glue after 24 hours, then heating bonding with other materials.

2.This adhesive mainly suitable for foam coating. Please heat and bond with the other materials within 15 days after coating. If exceed 15 days, it may influencethe fastness.

3.Common adhesive quantity is about 20g/m² , depends on substrates and application.

Storage:
1.Suggest to store at 0~40℃,dry and clean environment.

2.12 months shelf time from the production date in original package.

Package:

200kg/drum

Safety advice:

Read the safety data sheet, follow the operating steps, ensure the safety and controllability before the operation.

Disclaimer:

The information provided in this TDS is for reference. We strongly recommend the detailed testing before purchasing to determine the suitability of the product for the specified purpose. If there are any changes in materials or conditions, the test should be repeated multiple times. We do not assume any legal responsibility for the information in this TDS or any other written or oral advice related to the product, except as otherwise expressly agreed and for any personal injury or death caused by our negligence and any legal liability under applicable mandatory product liability regulations.